| Chain Drive Pin & Bushing Lube |
NSF H2 |
|
| This product is compounded for severe industrial applications, including high loads and ambient conditions that can cause premature wear and failure to heavy-duty industrial chains. |
| |
| MSDS (物質安全資料表)下載 |
| NSF 認證下載 |
| INS 認證下載 |
| |
| |
| Magna-Plate 200; Magna-Plate 200 NM |
| ISO Grades 22 through 680 |
| This is a premium product compouonded for severe industriail applications where high loads and ambient conditions cause premature wear and failure to heavy-duty industrial chains. Magna-Plate 200 NM is a high-performance version formulated without Moly. |
| |
| MSDS (物質安全資料表)下載 - Magna-Plate 200 |
| MSDS (物質安全資料表)下載 - Magna-Plate 200 NM |
| |
| |
| Super-Cling Chain Lube with PTFE |
PTFE超級鏈條潤滑油 |
NSF H2 |
|
| 本產品是經JAX特殊配製的最強粘性潤滑油。它含有極壓添加劑、抗磨劑、防銹與防氧化劑以及增粘劑。為了加強保護與增強耐磨特性，添加了懸浮級固體膜PTFE (特氟綸)。 |
| |
| MSDS (物質安全資料表)下載 |
| NSF 認證下載 |
| INS 認證下載 |
| |
| |
| Conveyor-Guard |
| A specially compounded lubricant designed for conveyor chains operating in ambient, wet and elevated temperatures to 400° F (204° C). It is a unique blend of selected synthetics, antiwear agents, rust inhibitors, suspension-grade moly disulfide and a synthetic tackifier. |
| |
| MSDS (物質安全資料表)下載 |
| |
| |
| Magna-Kote MLD |
| JAX Magna-Kote MLD is a bonded moly disulfide-based lubricant in a rapid evaporation-rate carrier. Its primary applications are for chain and conveyor lubrication where the use of an oil-based lubricant is not desired, yet antiwear and extreme-pressure protection are needed. |
| |
| MSDS (物質安全資料表)下載 |
| |
| |
| Magna-Kote S3D |
| This thin-film, antiwear lubricant is formulated to perform under the most demanding conveyor applications. Benefits include high lubricity, excellent paint and powder compatibility, excellent water dispersion and protection against wear and corrosion. |
| |
| MSDS (物質安全資料表)下載 |
| |
| |
|
| 412, 412 Plus |
| These are bonded 'dry-film' moly disulfide-based conveyor lubricants for high-temp applications. The carrier flashes or evaporates off at low temperatures, leaving bonded 'dry-film' lubrication. |
| |
| MSDS (物質安全資料表)下載 - 412 |
| MSDS (物質安全資料表)下載 - 412 Plus |
| NSF 認證下載 |
| INS 認證下載 |
| |
| |
| Magna-Kote 990 |
M-K 990合成高溫油系列 |
NSF H2 |
100%合成 |
|
| 90, 140, 90MV, 140MV |
| JAX Magna-Kote 990系列在合成傳送帶潤滑劑領域具有無可超越的性能。它是可用高達甚至超過650℉的應用的最佳高溫合成爐具鏈條潤滑油。它可具有極好的鏈條清潔力、低揮發性與防磨損保護。它能高效地將致汙物輸送到過濾系統以便於清除。 |
| |
| MSDS (物質安全資料表)下載 |
| NSF 認證下載 |
| INS 認證下載 |
| |
| |
|
| JAX Forming Chain Oil is a specially compounded lubricant designed for fiberglass-forming conveyor chains operating in ambient to elevated temperature and extremely corrosive environments. It combines superb antiwear and load-carrying abilities with unsurpassed rust and corrosion resistance for use in areas experiencing elevated levels of wear, rust and corrosion. |
| |
| MSDS (物質安全資料表)下載 |
| |
| |
| Pyro-Kote Series Oils |
P-K合成高溫油系列 |
NSF H2 |
100%合成 |
|
| ISO 32, 68, 220 |
| 這些合成高溫潤滑油具有極強的防磨損性能，同時採用頂級合成基油以延長高溫條件下的使用壽命。這些油主要推薦用於乾燥器、熱定形機、拉輻機、烤爐傳送帶與鏈條或其他需要具有特高溫的潤滑劑。 |
| |
| MSDS (物質安全資料表)下載 |
| NSF 認證下載 |
| INS 認證下載 |
| |
| |
| Magna-Kote 1020 Series |
100%合成 |
|
| ISO 68, 150, 220 |
| These are water-soluble high-temperature 100% synthetic conveyor lubricants for use in areas where compatibility with water-based paints and coatings is of primary importance. They provide excellent ashless performance at high temperatures, allowing conveyors to run cleanly, without carbon abrasives or residues that adversely affect conveyor chain life. |
| |
| MSDS (物質安全資料表)下載 |
| |
| |
| |
